Hello! Welcome to CzechBeadsExclusive.com channel! Today we will show you unusual Czech glass oval
beads in a shape of egg You can buy them on our website In this video we will create long necklace with
these oval beads LET’S START! Our beads are in a shape of bird egg. They are made from different Bohemian glass rods and decorated with geometric pattern Beads can be made from crystal and opaque glass,
also they can be in matte finish Geometric pattern is made using gold, silver or
bronze wash technique Combinations of these beads can bring interesting results! This necklace can be made from blue and
turquoise crystal beads In this video we will make this necklace. The unusual accent of it is the assymetrical order of beads WE WILL NEED: Measure out desired length of tiger tail wire. Add to the length of the necklace 5 – 6 cm from each side for the clasp fastening Tie a few temporary knots on one end of tiger tail wire, so the beads will not fall down Use this scheme to string the beads Make 1st decorative element of the necklace It has the following order of beads Scheme of decorative element The 1st decorative element is ready! String on 24 silver beads and proceed with the 2nd
decorative element Remember, that the necklace should be assymetrical Continue stringing (add another 24 silver beads) Tie a temporary knot on the end of tiger tail wire Turn the necklace, untie our previous permanent knot
and string on another 24 silver beads Begin with the the 3rd decorative element, another 24 silver beads and the 4th decorative element DON’T FORGET! It’s necessary to string on 48 beads after the 4th decorative element! Proceed to the clasp Lobster claw clasp consists of 2 parts. On one side (usually, on the right) is a lock (lobster claw), on the other side is jump ring The necklace is pretty long, so for making it more durable it’s necessary to use 2 crimp beads on each side of tiger tail wire Remove one silver bead from tiger tail wire Take crimp bead and string it on tiger tail wire String on silver bead back and then add the second crimp bead Pass tiger tail wire through jump ring, make a loop, and pass through the 1st crimp bead, silver bead and the 2nd crimp bead back Slightly pull the end of tiger tail wire. Do not tighten it too much -jump ring should move freely and be convenient when fastening Pinch first and second crimp beads with flat nose pliers Pass the end of tiger tail wire through 3-4 beads. It should be hidden inside the bead holes and be not visible Straighten the necklace Now, let’s add lobster claw clasp to the other side of the necklace Similarly, first remove the last silver bead from the tiger tail wire. Then string on one crimp bead, one silver bead and one more crimp bead Take lobster clasp and pass the wire through the ring of the clasp Make a loop and pass the wire back through the first crimp bead, silver bead and the second crimp bead Pass the end of tiger tail wire through 3-4 beads. It should be hidden inside the bead holes and be not visible To make the necklace stronger, straighten it and pull the end of the wire, so the clasp will be closer to the beads Pinch first and second crimp beads with flat nose pliers Carefully cut off the end of tiger tail wire with the side cutting pliers The necklace is ready to wear! All beads and findings you can buy in our online store.
We ship worldwide! Did you like this video? Please press “like”, subscribe to our channel and leave us a comment. Thank you 🙂