Today I want to show you a three rail diamond
kicking system [INTRO SOUND PLAYING] Well, this is the first system that I’ve actually
learned when I started playing seriously. It’s very easy to understand and to apply. I assume most players already know that system,
but I am also sure that beginners and even some average players havn’t heard about it. Just a few indications. In this system we have three reference shots
or lines that I will show you first, and then I am showing you how to easily apply if the
cueball is not on these reference lines. So lets start! [TRANSITION TRIANGLE] Reference Line Number 1: We assume the cueball
is somewhere on the line that is drawn from the corner pocket to this diamond. All we have to do now is – to play the cueball
exactly towards that diamond, with high left! It’s very important, that you play every single
shot in this system with high left in order to work. And if we’re doing that, the cueball should
travel exactly along this path and will drop into the corner pocket. And as you may noticed, the cueball will on
it’s way hit the rail very near to these diamonds, and then go exactly towards the corner pocket. So let’s have a look. [SMALL TRANSITION] So the cueball is on the right line, and I’m
aiming excatly towards that second diamond. Remember: Play the shot with high left. And as you see, I am making the ball but the
cueball hit the long rail. So I am double checking, the see wether it’s
the fault of the table or if I did somethring wrong. Aaand.. I hit the exact same spot on the long rail. And that’s because, every table plays different
of course. Usually aiming towards the second diamond
works on most of the tables, but depending wether the cloth is very new or very old,
or the rails are harder or softer I have to adjust just a little bit. So here I determined that this table plays
a little short, and that’s why I am adjusting by aiming just one inch next to the diamond. And as you see, the cueball’s now heading
exactly towards the corner pocket. [TRANSITION TRIANGLE] Reference Line Number 2: We assume that the
cueball is somewhere on the line that is drawn from the corner pocket to this diamond. And all we have to do now is – to play the
cueball exactly towards that diamond (Remember: with high left). And if we’re doing that, the cueball should
travel exactly along this path and will hit the rail at this diamond. And as you may noticed, the cueball will now
on it’s way hit the rail very near to these diamonds, and then finally at the last diamond. So let’s have a look. [SMALL TRANSITION] So the cueball is on the right line, and I’m
aiming excatly towards the third diamond. Remember: Play the shot with high left. And as you see, I hit the long rail too early. And that’s because I forgot to adjust for
the table. Because on reference shot number 1, we saw
that this table plays a little to short. So I am adjusting –
and I not only hit the 5 ball, but also made it. [TRANSITION TRIANGLE] Reference Line Number 3: We assume that the
cueball is somewhere on the line that is drawn from the corner pocket to this diamond. All we have to do now is – to play the cueball
exactly towards that diamond (Remember: with high left). And if we’re doing that, the cueball should
travel exactly along this path and will hit the rail NOT at this diamond, but exactly
between these two diamonds. And that’s because the cueball will now travel
to this imaginary diamond if we extended the table and therefore will hit the rail at half
a diamond. So let’s have a look. [SMALL TRANSITION] So the cueball is on the right line, and I’m
aiming excatly towards that third diamond. Remember: Play the shot with high left. And this time I am not making the ball, but
I came very close. I am showing you this attempt, because of
course because I just can’t promise, that you will everytime make the ball when using
this system – that’s just not possible. But: You have very good chance of course. [TRANSITION TRIANGLE] Before I am showing you how to adjust if the
cueball is not on that line – let’s summarize real quick what we’ve learned so far: – If the cueball is somewhere on this line,
and I am aiming towards this diamond – the cueball will hit the rail at this diamond – If the cueball is somewhere on THIS line,
and I am hitting towards THIS diamond – the cueball will travel to the next diamond and
will go into the corner pocket. – And iif the cueball is somehwere on this
line, and I am hitting towards this diamond, the cueball will travel to the next diamond
and will hit the short rail at half a diamond. [TRANSITION TRIANGLE] Of course the cueball won’t always be on one
of those lines. But to adjust is very simple. Let’s place the cueball at a random place
and an object ball that is hanging in the pocket. And now I am using Reference Line Number 1,
because this line brings me towards the corner pocket. I now just have to move that line until it’s
over the cueball. And now I am looking for the line, that is
exactly between those to. And where this line hits the rail – is my
target where I am shooting the cueball. This is the line that the cueball will travel. And now comes a very interesting part. If we compare this line, with the line of
the cueball on reference line number one. We see that the cueball will actually travel
the same path towards the end. And that’s because if we hit a lot of rails
with running side, the angles are self correcting. That’s the same principle by the way, that
happend in Chris Mellings famous 4 rail shot. I dont’ say that this shot is easy, but I
saw a few people recreating the run, and the easiest shot to recreate was acutally this
4 railer, because of the self correcting angles. But no let’s get back to our topic. [SMALL TRANSITION] This is the reference line number 1: Now I
am using my cuestick to move that line parallel. And now I am moving my cuestick excatly centered
between those lines. I extend that line until I hit the rail – and
this is my aiming point. [SMALL TRANSITION] So now the object ball is not hanging in the
pocket, so I am using reference line number 3. I am aiming towards that diamond, and move
my cuestick half way, I imagine the line, adjust for the table, and I have determined
this point on the table to hit. I hit the cueball with high left, and I made
the five ball. [SMALL TRANSITION] And in the last example, of course I use reference
line number 2, because the object ball is next to this diamond. Again I am doing the same thing, adjusting
a little bit, and managed to make the ball, with rail first. [TRANSITION TRIANGLE] The object ball of course won’t always be
exactly on one of those spots that I was showing yoz�. So if the object for example is at half a
diamond at the long rail, I am neither using reference Line 1 nor reference Line Number
2, I am using the line that is exactly between those to, because this line will bring ma
half a diamond to the short rail of course. So you can easily adjust depending where the
obbject ball is placed. [SMALL TRANSITION] And the object ball also won’t be exactly
on a rail all the time. Making the object ball then becomes harder,
but hitting it is still a very doable task. I know, if I am using reference line number
2, the cueball will travel from this diamond to this diamond, and I have a very good chance
to hit the ball. You just have to study where the cueball will
hit the other two rails, when playing different lines from different angles. [TRANSITION TRIANGLE] A few hints at the end: If you want to make more balls using this
system, you need to be able to play a repeatable shot. If you’re giving too much or too less spin,
or hit too hard or too low – the path of the cueball will of course change. But If you figured the behaviour of the table
out (remember: we did that with the cueball on reference line number 1) and if you can
play the same shot again – this system is very reliable. You will make at lot of balls, and it’s almost
impossible to not hit the object ball. So if you have any questions about this system
– just let me know in the comments. I will give my best, to make things clear
for you. If you enjoyed this lessons and got value
out of it, hit the like button, consider to subscribe to my channel or leave a comment. Thanks for watching – and thanks to all of
my Patrons and subscribers. And we’ll see us at the next lesson. Take Care!